English
España
Deutsch
A CNC machining center is a CNC machine tool with a tool magazine, which can automatically change tools, and can perform a variety of processing operations on the workpiece within a certain range. The characteristics of the parts processed on the machining center are: after the processed part is clamped once, the CNC system can control the machine tool to automatically select and replace the tools according to different procedures; automatically change the spindle speed, feed rate and the motion path of the tool relative to the workpiece And other auxiliary functions, continuously and automatically perform multi-process processing such as drilling, countersinking, reaming, boring, tapping, and milling on each processing surface of the workpiece.
Steps of mold production
1. Mould pattern design, including mould assembly drawing and parts drawing.
2 Formulation of process regulations That is, to formulate the processing technology and operation method of the entire mold or parts, and fill in the process card.
3 The production of parts is to process parts according to the craftsmanship on the craft card.
1. Mould pattern design, including mould assembly drawing and parts drawing.
2 Formulation of process regulations That is, to formulate the processing technology and operation method of the entire mold or parts, and fill in the process card.
3 The production of parts is to process parts according to the craftsmanship on the craft card.
4 Assembly.
Process method of mold processing
1. Casting process Zinc alloy casting, low melting point desirable casting, beryllium copper desirable casting and synthetic resin casting.
2. Cutting processing: Ordinary machine tool processing, profiling milling processing, forming grinding processing engraving, CNC machine tool processing.
3. Special processing, electrical processing (electric spark, wire cutting, electrolysis), corrosion processing, ultrasonic processing.
4. Rough machining aims to remove most of the margin.
5. Finishing Make the workpiece achieve higher machining accuracy and surface quality.
6. Refurbishment polishing, grinding of guide posts and guide sleeves.
1. Casting process Zinc alloy casting, low melting point desirable casting, beryllium copper desirable casting and synthetic resin casting.
2. Cutting processing: Ordinary machine tool processing, profiling milling processing, forming grinding processing engraving, CNC machine tool processing.
3. Special processing, electrical processing (electric spark, wire cutting, electrolysis), corrosion processing, ultrasonic processing.
4. Rough machining aims to remove most of the margin.
5. Finishing Make the workpiece achieve higher machining accuracy and surface quality.
6. Refurbishment polishing, grinding of guide posts and guide sleeves.
